|
|
|
|||
VPN between Cisco and Windows
| Issues or Symptoms | Article Title & Link | Description or Resolution | Cases |
| Windows VPN Compatibility with Cisco VPN | Windows VPN Compatibility with Cisco VPN | Windows Client to IOS Gateway VPN Tunnel Windows Routing and Remote Access (RRAS) Gateway to IOS Gateway VPN Tunnel RRAS to IOS Gateway-to-Gateway Pure IPSec Tunnel |
|
| Windows Virtual Private Network Connectivity to Cisco PIX Firewall | Windows Virtual Private Network Connectivity to Cisco PIX Firewall | Cisco Secure PIX Firewall Software Release 6.0 adds support for Layer 2 Tunneling Protocol (L2TP) over Internet Protocol Security (IPSec). Users that run Windows 2000 can use the native IPSec client and L2TP client to establish an L2TP tunnel to the PIX firewall. Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0 and Windows 2000 PPTP should work if your Cisco PIX PPTP implementation supports user ID/password user authentication | |
| Configuring IPSec Tunnel Mode VPN Between ISA Server 2004 and Cisco PIX v6.3.1 | Configuring IPSec Tunnel Mode VPN Between ISA Server 2004 and Cisco PIX v6.3.1 | In this walk-through, you will configure ISA Server 2004, configure Cisco PIX 501, and then reconcile the IPSec policies in ISA Server and PIX. | |
| Configuring IPSec Between a Microsoft Windows 2000 Server and a Cisco Device | Configuring IPSec Between a Microsoft Windows 2000 Server and a Cisco Device | Configuring the Microsoft Windows 2000 Server to Work
with Cisco Devices Configuring the Cisco Devices |
|
| Cisco Secure PIX Firewall 6.x and Cisco VPN Client 3.5 for Windows with Microsoft Windows 2000 and 2003 IAS RADIUS Authentication | Configuring Cisco Secure PIX Firewall 6.x and Cisco VPN Client 3.5 for Windows with Microsoft Windows 2000 IAS RADIUS Authentication | This sample configuration shows how to configure Cisco VPN Client version 3.5 for Windows and the Cisco Secure PIX Firewall for use with Microsoft Windows 2000 and 2003 Internet Authentication Service (IAS) RADIUS Server | |
| Configuring L2TP Over IPSec Between PIX Firewall and Windows 2000 PC Using Certificates | Configuring L2TP Over IPSec Between PIX Firewall andWindows 2000 PC Using Certificates | Layer 2 Tunneling Protocol (L2TP) over IPSec is supported on Cisco Secure PIX Firewall Software Release 6.x or later. Users that run Windows 2000 can use the native IPSec client and L2TP client in order to establish an L2TP tunnel to the PIX Firewall. The traffic flows through the L2TP tunnel encrypted by IPSec security associations (SAs). | |
|
This web is provided "AS IS" with no warranties.
Copyright © 2002-2018
ChicagoTech.net,
All rights reserved. Unauthorized reproduction forbidden.