Home | Troubleshooting |  Quick Setup  |  Cisco How to  |  Wireless  |  Forums   | Site Map | Services  | About Us | Chicagotech MVP  | Search  | Contact Us  |              

 

 

How to setup Mobile 6 ActiveSync using Emulator

 

1. Run ActiveSync, Devices Emulator Manager and Emulator Image. Press Start to select ActiveSync. If the ActiveSync is not in the list, select Programs and then ActiveSync.

 

 

2. If this is the first to setup ActiveSync, you will have an option to "set up your device to sync with it...". Note: don't enable cradle in the Devices Emulator Manager. Otherwise, you won't be able to setup ActiveSync.

 

 

3. If you have setup ActiveSync before, press Menu and the Options to delete it or Configure Server to re-configure it.

 

 

4. Enter email information.

 

5. Enter server information.

 

6. Enter user inforamtion.

 

 

7. Choose the data you want to sync and press Finish to complete the settings.

Post your questions, comments, feedbacks and suggestions

Contact a consultant

Related Topics

1. Requirement of Windows Mobile Emulator

2. Turn on a Mobile Phone

 

3. How to deploy an Emulator

 

4. Configure Microsoft ActiveSync

1) Enable DMA

2) Run Microsoft ActiveSync

3) Add Server Source

4) Enter Server Address

5) Enter User's Information

6) Choose the data to synchronize

7)  Check the Status

8) Troubleshooting


 

 


 

 

Hit Counter   This web is provided "AS IS" with no warranties.
Copyright 2002-2017 ChicagoTech.net, All rights reserved. Unauthorized reproduction forbidden.