|
EqualLogic How to
Assign
DNS name to the SAN IP
Can't SSH or telnet to EqualLogic SAN
EqualLogic SAN features
How do I create two groups in EqualLogic SAN
How to
access EqualLogic Group Manager GUI
How to add a new EqualLogic SAN to a group - Step by
step with screenshots
How to add iSCSI Initiator to
EqualLogic SAN Group Manager
How to create RAID in EqualLogic SAN
How to configure Network on
EqualLogic
How to enable simultaneous connections from imitators
with different IQN names
How to increasing the Size of a Volume on EqualLogic SAN
How to Install EqualLogic Host Integration Tools
Install and configure EqualLogic SAN MPIO Tools
How to
create an EqualLogic SAN Volume for VMware storage
How to move volume between pools in EqualLogic SAN
How to ping from EqualLogic SAN to other device
How to promote a volume in EqualLogic Replication
Partners. - Step by step with screenshots
How to setup NTP server in EqualLogic
How to shutdown EqualLogic SAN
How to shutdown or Restart EqualLogic using GUI
How to Setup a Snapshot in EqualLogic SAN
How to upgrade EqualLogic SAN Firmware
How to upgrade EqualLogic SAN Firmware using GUI
How to use EqualLogic Tools
Questions regarding EqualLogic SAN Network
RAID 10 or RAID 50
How to
create a EqualLogic SAN Volume for VMware Storage
1. Open EqualLogic Group Manager
2. Click on Volumes and select Create volume.
3. in Volume space, enter size and make sure Thin
provisioned volume is unchecked. Note: it is not recommended to use thin
provision for VMware staroge.
4. Click Next to continue to finish
the settings.
Post your questions, comments, feedbacks and suggestions
Contact a consultant
Related Topics
|
