Home | Troubleshooting |  Quick Setup  |  Cisco How to  |  Wireless  |  Forums   | Site Map | Services  | About Us | Chicagotech MVP  | Search  | Contact Us  |              

 

 

How to restore Hyper-V VM with 2 or more disks

 

Assuming you have a VM with 2 disks in Hyper-V running windows 2008 R2. You have used Windows Backup to backup the VM. Now, you want to restore it on different Windows 2008 R2 Server. Please follow these steps:

 

1. Run Windows Server Backup and click Recover.

2. Since it was backed up on the different server, check  backup stored on another location.

 

 

3. Follow the instruction to restore the VM.

4. Now, run Hyper-V Manager to create a new virtual machine.

5. You check Use an existing virtual hard disk and browse to the OS VHD. Note: There are two disks in the VM, but you select OS disk first and then will add the second disk later.

 

6. Follow the instruction and create the VM and then click Settings in the VM.

7. In the Settings page, create as shown.

 

8. Now, you should have two disks in the VM and you can start it.

Post your questions, comments, feedbacks and suggestions

Contact a consultant

Related Topics


 

 


 

 

Hit Counter   This web is provided "AS IS" with no warranties.
Copyright 2002-2017 ChicagoTech.net, All rights reserved. Unauthorized reproduction forbidden.