Home | Troubleshooting |  Quick Setup  |  Cisco How to  |  Wireless  |  Forums   | Site Map | Services  | About Us | Chicagotech MVP  | Search  | Contact Us  |              

 

 

Error 913: A Remote Access Client attempted to connect over a port that was reserved for Routers only (also re: Error 629 and 645). The event viewer may also generate the following event:

Event ID: 20188
Source: RemoteAccess
Description: The user username, attempting to connect on port, was disconnected because of the following reason:
A Remote Access Client attempted to connect over a port that was reserved for Routers only.

Resolutions:
1) Enable Remote access connections. To do this, go to Routing and Remote Access administrative tool>Ports>Properties, click the appropriate port (L2TP, Modem, PPTP, LPT1, and so on), and then click Configure, and then check the Remote access connections (inbound only).
2)
Double-click the "Incoming Connections" icon on network connections folder and make sure "Allow VPN Connections" is enabled.

Post your questions, comments, feedbacks and suggestions

Related Topics

VPN error code
VPN Browsing Issues
VPN Logon Issues
VPN Name Resolution
VPN as Router
VPN Routing Issues
VPN TCP/IP Settings
Ports for VPN

VPN/PPTP
VPN Slow Issues

Previous Page   Next Page
 

 


 

 

Hit Counter   This web is provided "AS IS" with no warranties.
Copyright 2002-2015 ChicagoTech.net, All rights reserved. Unauthorized reproduction forbidden.