configure RRAS to register one ip on WINS

The resolution 3 for Name resolution and connectivity issues on a RRAS that also runs DC, DNS or WINS

Configure the RRAS to register only the IP address of the local network adapter in WINS

If the Routing and Remote Access server is running the WINS service, you may configure the RRAS to register only the IP address of the local network adapter in WINS.

To do that, add the DisableNetbiosOverTcpip registry value for the Routing and Remote Access service. The DisableNetbiosOverTcpip registry value disables the NetBIOS over TCP/IP (NetBT) protocol for remote access connections. Therefore, the server will not register the PPP adaptor in the WINS database.

Here are these steps:

1. Click Start, click Run, type regedit, and then click OK.

2. Locate and then click the following registry subkey:

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\RemoteAccess\Parameters\IP

3. On the Edit menu, point to New, and then click DWORD Value to add the following registry value:

Value name: DisableNetbiosOverTcpip
Data type: REG_DWORD
Value data: 1

4. Close Registry Editor, and then restart the Routing and Remote Access service. To restart a service, click Start, point to Programs or All Programs, point to Administrative Tools, and then click Services. In the Services console, right-click the service, and then click Restart.

Post your questions, comments, feedbacks and suggestions

Contact a consultant

Previous Page Next Page